
Formerly SamBarnard.net 3971 N. 14th Place, Phoenix, AZ, USA 85014 Fax 602-240-5522 Phone 602-279-4041 Call to order, or for free drum wrap samples

Request Estimate for Drum Wrap

Our phones are staffed Monday thru Friday, 9am to 5pm, Arizona time. We are ready and waiting to give you a quote via telephone during these hours. If this is inconvenient please feel free to complete this form and send a request for an estimate. Please review our web site thoroughly before submitting this form.

This data is imported into our system to create an estimate. We then email the estimate if you have supplied a valid email address. Otherwise you should expect a RETURN PHONE CALL with the details of the estimate in a few business days.

If yours is a time-sensitive request,
DO NOT submit this form,
please telephone us as-soon-as-possible.

Notes:

Correspondence from the submitted information are an estimate only, prices may change without notice.
Valid information for all fields with a red asterisk at the right are required in order to receive a quote. Incomplete forms will NOT receive an estimate.
YES, We ship world-wide!
Information collected here is never sold or shared with any business outside JamminSam. (We never have and we never will!)
Please do not use this form to request samples. Samples will only be sent if YOU telephone us at 602-279-4041.

How did you hear about us?

Modern Drummer Magazine
Web search
Saw the video?
Were you referred to us by someone?

Have you ever ordered from us before? Yes No *

First name

Last name

Shipping information:

Street Address

City name

State/Province:

Zip Code/
Postal code:

Country:

TO OUR INTERNATIONAL CUSTOMERS:
Please consider time-zone differences. The phone number(s) you give here will be used to call during our office hours. Arizona time is normally GMT -7 hours.

Location	Preferred Phone	Phone Number
Home		*
Cell
Work:		ext

The more phone numbers you provide for us, the easier it will be for us to contact you and give you the requested estimate or ask a question if something is unclear. Thank You.

Email:

If supplied, we will email your quote, else we'll telephone you.

Color: *
Please select only one color. There is no need to select more than one color or to submit the form more than once. To receive a quote on other colors, ask the associate when they call you.

I would like a price quote for the above color in the following drum sizes:
(please give drum head measurements in whole inches and give shell depth measurements in inches and tenths & hundredths of an inch, do not include the abbreviation for inches ["]. Example: 1-9/16" should be entered as 1.5625):

Drum Head Size	Hoop strip/ inlay pairs for this drum?	If yes, then pick the width of the hoop strips / inlay pairs.
Concerning hoop strips, when in doubt choose the greater width. We cut any size hoop strip, within 1/16"
1.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
2.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
3.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
4.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
5.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
6.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
7.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
8.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
9.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²
10.	No Yes	To get hoop strips only, leave this shell depth at zero -- ²

Note 1: The shell depth must be accurate to within 1/16". Do not trust the accuracy of this to what it looks like or what a catalog says the measurement is. To best accomplish this, take one head off and measure inside the drum shell, from tip of the bearing-edge to tip of the bearing-edge.

Important note: Do not give measurements of old wrap material!

Do you want Standard 3/8" eyelets? as pictured here: *
No
Yes, I'd like Chrome Black Gold

1/2" cast metal eyelets w/ nut

OR would you like our 1/2" cast metal eyelets w/nut?
as pictured at right ... *
No
Yes, I'd like Chrome Black Gold

Yes No	When setup to play, do these drums have heads on both sides? : *
Manufacturer
Year
If you are a business, please enter the business name here:

[Home] [Site Map]

Please contact us with questions or comments about this web site.
Copyright © 1982 thru 2008 Sam Barnard Phoenix, Arizona

Web Site design, maintenance and search engine marketing
Web Site Redesign 2002