Eyelet Installer Tool
JamminSam began development of this tool in 2000 and sales to our
customers started in July of 2004. We continue to use the 2004 design,
albeit with some upgrades in the quality of the components that make
up our eyelet installer tool. Others have copied our design, but
JamminSam is the first to create a tool using a two step process that
does not use impact (like a hammer) to crimp the eyelet into place.
With an Allen wrench, our tool steadily compresses the eyelet into a
highly sought factory quality finish.
"I just wanted to take a moment
to thank you and congratulate you on your design of the Eyelet Installer
Tool. While many high end custom drum shops are still squashing the hind
end of these things with a ball peen hammer, you have offered a vastly
superior option. An assembly of 100% standard parts, that performs a two
step process very effectively and as with all superior design, elegant in
its simplicity. Nice job folks!"
Peter Hodgson (Satisfied Customer)
West Port, Connecticut
Eyelet tool installer (free w/ drum wrap orders over $100 - if needed) - sold only
w/ purchase of our drum wrap (comes w/ 2 practice
eyelets)..........................................................$3.99 ea.
Allen Wrench (3/16"- not pictured)..............................$1.00
What eyelet colors and sizes are
available?
Important Note: A lack of success w/ the above eyelet installer does not
apply to any warrantees or guarantees stated by us toward our drum wraps.
Any problems resulting from the use of this tool is solely the responsibility of
the end user and does not result in free wrap replacement.
 However, the
proper use of this tool can give factory like results when installing our
standard & custom replacement eyelets (the top view of the gold eyelet shows
the results). We have had 1000s of satisfied customers with the use of
this tool.
|
